The source for OSHA training and more!

OSHA Training in Fresno CA

OSHA Requirements and Training Resources for Fresno Ca

Who regulates worker safety and OSHA training in Fresno CA? The State of California, under an agreement with Federal OSHA, operates an approved State Plan OSHA Program, commonly known as Cal-OSHA. Initial approval of the California State Plan was published on May 1, 1973, and certification for completing all developmental steps was received on August 19, 1977.

CA OSHA Training Regulations and Standards

Health and safety standards that require OSHA training in Fresno and the rest of the State of California are significantly different than those of Federal OSHA. The Occupational Safety and Health Standards Board is a standard setting agency within the Cal-OSHA program, which includes development and maintenance of standards for certain areas not covered by federal standards or enforcement. These latter standards apply to elevators, aerial passenger tramways, amusement rides, pressure vessels, and mine safety training.

Cal-OSHA health and safety standards (also known as safety orders under Title 8) are available on the California DOL website.

Jurisdiction

This section clarifies which agency regulations apply to businesses and organizations needing to provide OSHA training in Fresno CA. The California State Plan applies to all public and private sector places of employment in Fresno CA, with the exception of Federal employees, the United States Postal Service (USPS), private sector employers on Native American lands, maritime activities on the navigable waterways of the United States, private contractors working on land designated as exclusive Federal jurisdiction, and employers that require Federal security clearances.

California OSHA Information

The Department of Industrial Relations administers the California Occupational Safety and Health Program, commonly referred to as Cal-OSHA. The Division of Occupational Safety and Health (DOSH) oversees enforcement and consultation. There are several Cal-OSHA offices located throughout the state.

The central toll free telephone number for Cal/OSHA is 1-866-924-9757. Individual District Offices can be located by accessing the Cal-OSHA Enforcement Unit contact page on the Cal/OSHA website. The District Office for Fresno can be contacted at:

Cal-OSHA District Office – Fresno
2550 Mariposa Street
Suite 4000
Fresno, CA 93721

(559) 445-5786

Federal OSHA’s National Emergency Hotline telephone number is 1-800-321-OSHA.  Contact OSHA Training Services Inc in Fresno CA at 1-877-771-6742.

Authorized OSHA Trainers in Fresno CA

There is no official certification required to teach most OSHA training classes in Fresno. However, you must make certain that on site OSHA 10 or 30-hour training classes are conducted by a trainer who is officially authorized to conduct these OSHA courses. The trainer must first complete a series of OSHA trainer classes provided by one of the OSHA Education centers located around the country. You can confirm their status as a currently authorized OSHA Outreach trainer by asking to look at their credentials proving they completed the following trainer courses.

Construction industry trainers must successfully complete the OSHA 510 course, followed by the OSHA 500 course. This qualifies the trainer to conduct OSHA 10-hour construction training in Fresno CA and anywhere else in the state for a four-year period. The trainer is also authorized to conduct OSHA 30-hour construction training in Fresno and elsewhere in the state. To maintain their status as an authorized OSHA Outreach trainer for construction, they must complete the OSHA 502 trainer update course every four years.

General industry trainers must successfully complete the OSHA 511 course, followed by the OSHA 501 course. This qualifies the trainer to conduct OSHA 10-hour general industry training in Fresno CA and anywhere else in the state for a four-year period. The trainer is also authorized to conduct OSHA 30-hour general industry training in Fresno CA and elsewhere in the state. To maintain their status as an authorized OSHA Outreach trainer for general industry, they must complete the OSHA 503 trainer update course every four years.

Be assured that our trainers who conduct on-site OSHA training classes in Fresno are authorized OSHA Outreach trainers. Scroll down to see links to all of the on site OSHA training classes we conduct listed below.

Online OSHA 10 and 30-hour Training Courses Accepted in Fresno CA

There are also OSHA-authorized online 10 and 30-hour training courses available for construction and general industry. However, you must pay close attention, as only those course providers that are specifically authorized to provide these courses can issue trainees the official DOL / OSHA 10 or 30-hour wallet cards. There are plenty of imitators out there who use deceptive fine print and “too good to be true” pricing to sell you a course that is not OSHA authorized.

You can rest assured that the 10 and 30-hour online OSHA training courses offered on our website are authorized by OSHA, and are accepted in Fresno CA as well as in all other states and US territories.

OSHA training Fresno CA

Fresno OSHA Training Resources

Cal/OSHA and other California Labor Law Posters

OSHA Training Conducted in English or Spanish at Your Site in Fresno CA (see available courses below)

On-Site OSHA Training Classes IN Fresno California

Request a proposal for On Site osha training in Fresno Ca

Disclaimer: This information was obtained from the Federal OSHA website. OSHA Training Services Inc. makes every effort to ensure that the information on this page is accurate and up to date, but changes in state law and procedures affecting the information on this page are beyond our control. Contact Cal/OSHA program staff directly to verify important information about OSHA training requirements in Fresno CA.

Search