OSHA Training in Concord NH

Worker safety for private companies required to provide their employees with OSHA training in Concord and throughout New Hampshire is regulated by the Federal Occupational Safety and Health Administration (OSHA). New Hampshire does not operate an approved state OSHA program for public employees at the state or local government (e.g.: municipalities, counties, public schools and universities) level.

We Are Authorized OSHA Trainers in Concord NH

There is no official certification required to teach most OSHA training classes in Concord NH. However, you must make certain that on site OSHA 10 or 30-hour training classes are conducted by an OSHA trainer like ours who are officially authorized to conduct these OSHA courses. The trainer must first complete a series of OSHA trainer classes provided by one of the OSHA Education centers located around the country. You can confirm their status as a currently authorized OSHA Outreach trainer by asking to look at their credentials proving they completed the following trainer courses.

Construction industry trainers must successfully complete the OSHA 510 course, followed by the OSHA 500 course. This qualifies the trainer to conduct OSHA 10-hour construction training in Concord NH and anywhere else in the state for a four-year period. The trainer is also authorized to conduct OSHA 30-hour construction training in Concord NH and elsewhere in the state. To maintain their status as an authorized OSHA Outreach trainer for construction, they must complete the OSHA 502 trainer update course every four years.

General industry trainers must successfully complete the OSHA 511 course, followed by the OSHA 501 course. This qualifies the trainer to conduct OSHA 10-hour general industry training in Concord NH and anywhere else in the state for a four-year period. The trainer is also authorized to conduct OSHA 30-hour general industry training in Concord NH and elsewhere in the state. To maintain their status as an authorized OSHA Outreach trainer for general industry, they must complete the OSHA 503 trainer update course every four years.

Be assured that our trainers who conduct on-site OSHA training classes in Concord NH are authorized OSHA Outreach trainers.

Our Online OSHA 10 and 30-hour Training Courses Accepted in Concord NH

We also provide OSHA-authorized online 10 and 30-hour training courses available for construction and general industry. However, you must pay close attention when you compare other providers’ courses, as only those course providers that are specifically authorized to provide these courses can issue trainees the official DOL / OSHA 10 or 30-hour wallet cards. There are plenty of imitators out there who use deceptive fine print and “too good to be true” pricing to sell you a course that is not OSHA authorized.

You can rest assured that the 10 and 30-hour online OSHA training courses offered on our website are authorized by OSHA, and are accepted in Concord NH as well as in all other states and US territories.

Regulation of Workplace Safety & Health in Concord NH

Regulated employers located in the state of New Hampshire are governed by the Federal OSHA health and safety standards found in the 29 Code of Federal Regulations (CFR). These include, but are not limited to, the OSHA workplace poster requirements in Part 1903, OSHA injury and illness record-keeping requirements in Part 1904, general industry standards in Part 1910, maritime standards in Parts 1915, 1917 and 1918, construction standards in Part 1926, and agricultural standards in Part 1928.

Links to see federal OSHA training requirements for construction and general industry are available below on this page.

Jurisdiction

Federal OSHA exercises jurisdiction over most private employers in New Hampshire. Federal employers in NH also operate under the jurisdiction of Federal OSHA. There is one OSHA office located in the state:

Concord Area Office
J.C. Cleveland Federal Bldg
53 Pleasant Street, Room 3901
Concord, New Hampshire 03301

(603) 225-1580

The OSHA national emergency hotline telephone number is 1-800-321-OSHA.

Special NH Law Requiring OSHA 10 Hour Construction Training

The State of New Hampshire has a state law requiring most workers on most publicly funded construction sites in Concord NH and the rest of the state to possess the OSHA wallet card proving they have successfully completed the OSHA 10 hour construction training course.

Additional Safety Training Considerations for Workers in New Hampshire

While our onsite and online OSHA 10 and 30-hour training courses for construction and general industry are the gold standard for training about general hazard recognition and avoidance for workers and supervisors, there are many workers in NH who face unique environmental and occupational hazards that require other specialized safety training to prevent serious injuries and illnesses.

Cold Stress Prevention Training is essential for those working in freezing temperatures or even cool, damp conditions—whether outdoors or in workplaces such as refrigerated warehouses, food processing plants, or unheated job sites. Cold stress can lead to frostbite, hypothermia, and reduced dexterity, increasing the risk of accidents. This training helps workers recognize the early symptoms of cold-related illnesses and implement safe work practices to minimize risks in frigid environments.

Conversely, Heat Illness Prevention Training is critical for anyone exposed to high temperatures or humid conditions, where prolonged exposure can result in heat stress or even life-threatening heat stroke. Workers in construction, roadwork, landscaping or lawn-care, commercial kitchens, attic work, or buildings without adequate ventilation must know how to recognize the early signs of heat-related illness and know how why they need to stay hydrated, take proper rest breaks, and respond to emergencies. This training provides essential knowledge to help them work safely in extreme heat.

And workers in industries such as storm or wastewater management and agriculture must be aware of the dangers of Hydrogen Sulfide (H2S), a highly toxic gas commonly found in drilling sites, refineries, chemical plants, manure pits, grain elevators, sewers, and underground utility spaces. Without proper precautions, exposure can quickly become fatal. H2S Hazard Awareness Training ensures workers can identify H2S hazards, understand the importance of gas detection equipment, and follow emergency procedures to stay safe in high-risk environments.

Also, workers involved in confined space entry operations must complete Confined Space Entry Training for General Industry before entering hazardous areas such as tanks, vats, silos, sewer and storm drain systems, underground utilities, and many crawl spaces. Supervisors overseeing confined space entry and attendants monitoring entrant safety must also be trained. These environments pose serious risks, including toxic gases, oxygen deficiency, and engulfment. And those construction workers and supervisors involved in confined space entry operations must complete specialized Confined Space Training for Construction.