OSHA Training in Rock Springs WY
OSHA Requirements and Training Resources for Rock Springs WY
The State of Wyoming operates an approved State OSHA program that primarily regulates OSHA training in Rock Springs WY. The Wyoming State Plan was initially approved on May 3, 1974, and was granted final state plan approval on June 27, 1985.
WY OSHA Training Regulations and Standards
The Wyoming State Plan adopts all federal standards identically except for 1910 Subpart A, B, and C, and 1926 Subpart A and B, which have been reworded to reflect the Wyoming’s Safety Act. Wyoming has also adopted the Federal record-keeping and reporting requirements identical to the federal rule, 29 CFR 1904. Links to federal OSHA training requirements for construction and general industry are available below on this page.
Wyoming has unique standards that cover Oil and Gas Well Drilling, Servicing, Special Servicing and Anchor Tester Requirements. Federal OSHA does not have specific standards for this industry. For Wyoming’s Occupational Safety and Health Standards, access the Wyoming Occupational Health and Safety’s website.
Since Wyoming does not have jurisdiction in maritime industries, the state has not adopted 29 CFR 1915, 1916, 1917, or 1918 or a state equivalent.
Jurisdiction
The Wyoming State Plan applies to all public and private sector places of employment in Rock Springs and the rest of the state of Wyoming, with the exception of Federal employees (including those employed at Yellowstone and Grand Teton National Parks), the United States Postal Service (USPS), private sector maritime, employment at Warren Air Force Base and at the Naval Petroleum and Oil Shale Reserve in Casper, and certain agricultural related operations (field sanitation and temporary labor camps), which are subject to Federal OSHA jurisdiction.
Wyoming OSHA Information
The Wyoming OSHA plan operates under the umbrella of the Worker Safety and Compensation Division, which is in the Wyoming Department of Employment. The main office is located in Cheyenne:
1510 E. Pershing Blvd. – West Wing
Cheyenne, WY 82002
The state also operates a satellite office in Rock Springs WY.
OSHA’s National Emergency Hotline telephone number is 1-800-321-OSHA.
OSHA Training Resources
OSHA Training Requirements for 1910 General Industry
OSHA Training Requirements for 1926 Construction
OSHA Training Conducted in English or Spanish at Your Site in Rock Springs WY (see available courses below)
On-Site OSHA Training Classes IN Rock Springs WY
OSHA 10 Hour Construction Training Class
OSHA 30 Hour Construction Training Class
Confined Space Entry for Construction Training Class
OSHA 10 Hour General Industry Training Class
OSHA 30 Hour General Industry Training Class
Confined Space Entry for General Industry Training Class
Excavation Competent Person Training Class
40 / 24 / 8-Hour HazWoper Safety Training Classes
More OSHA Training Classes Conducted in Rock Springs WY
Request a proposal for On SIte osha training in Rock Springs WY
Rock Springs WY - OSHA Training
Online OSHA Training Courses
Complete your OSHA training ASAP. Take an online OSHA training course. Over 100 on-demand OSHA training courses available for instant access, including the OSHA 10 & 30 hour courses. Print your own OSHA training certification.
Disclaimer: This information was obtained from the Federal OSHA website. OSHA Training Services Inc. makes every effort to ensure that the information on this page is accurate and up to date, but changes in state law and procedures affecting the information on this page are beyond our control. Contact WY OSHA program staff directly to verify important information about OSHA training requirements in Rock Springs WY.