OSHA Training in Ennis TX

OSHA Training Services Inc., well established OSHA trainers for Ennis TX and the surrounding area, provides all the most popular OSHA training classes for local businesses and government agencies. Whether you need OSHA 10-hour or 30-hour training, specialized safety courses, or compliance assistance, we deliver expert-led instruction tailored to your industry. Keep your workforce safe and compliant with trusted OSHA training from the local experts!

OSHA Training Regulations and Standards

Regulated employers located in Ennis TX are governed by the Federal OSHA health and safety standards found in the 29 Code of Federal Regulations (CFR). These include, but are not limited to, the OSHA workplace poster requirements in Part 1903, OSHA injury and illness record-keeping requirements in Part 1904, general industry standards in Part 1910, maritime standards in Parts 1915, 1917 and 1918, construction standards in Part 1926, and agricultural standards in Part 1928.

Worker safety for private companies needing OSHA training in Ennis is regulated by the Federal Occupational Safety and Health Administration (OSHA). The state of Texas does not operate an approved state OSHA program for public employees at the state or political sub-division (e.g.: public school district or college, municipal, county) level.

Scroll down this page to see OSHA training requirements for construction and general industry operations located in Ennis TX.

Jurisdiction

Federal OSHA exercises jurisdiction over most private employers in the state of Texas. Federal employers in TX also operate under the jurisdiction of Federal OSHA. There is one OSHA area office serving the Ennis TX area:

Dallas Area Office
1100 East Campbell Road
Suite 250
Richardson, TX 75081

The OSHA national emergency hotline telephone number is 1-800-321-OSHA.

We Are Authorized OSHA Trainers in Ennis TX

There is no official certification required to teach most OSHA training classes in Ennis TX. However, you must make certain that on site OSHA 10 or 30-hour training classes are conducted by a trainer who is officially authorized to conduct these OSHA courses. The trainer must first complete a series of OSHA trainer classes provided by one of the OSHA Education centers located around the country. You can confirm their status as a currently authorized OSHA Outreach trainer by asking to look at their credentials proving they completed the following trainer courses.

Construction industry trainers must successfully complete the OSHA 510 course, followed by the OSHA 500 course. This qualifies the trainer to conduct OSHA 10-hour construction training in Ennis TX and anywhere else in the state for a four-year period. The trainer is also authorized to conduct OSHA 30-hour construction training in Ennis TX and elsewhere in the state. To maintain their status as an authorized OSHA Outreach trainer for construction, they must complete the OSHA 502 trainer update course every four years.

General industry trainers must successfully complete the OSHA 511 course, followed by the OSHA 501 course. This qualifies the trainer to conduct OSHA 10-hour general industry training in Ennis TX and anywhere else in the state for a four-year period. The trainer is also authorized to conduct OSHA 30-hour general industry training in Ennis TX and elsewhere in the state. To maintain their status as an authorized OSHA Outreach trainer for general industry, they must complete the OSHA 503 trainer update course every four years.

Be assured that our local OSHA trainers who conduct on-site OSHA training classes in Ennis TX are authorized OSHA Outreach trainers. Scroll down to see links to all of the on site OSHA training classes we conduct listed below.

Online OSHA 10 and 30-hour Training Courses Accepted in Ennis TX

There are also OSHA-authorized online 10 and 30-hour training courses available for construction and general industry. However, you must pay close attention, as only those course providers that are specifically authorized to provide these courses can issue trainees the official DOL / OSHA 10 or 30-hour wallet cards. There are plenty of imitators out there who use deceptive fine print and “too good to be true” pricing to sell you a course that is not OSHA authorized.

You can rest assured that the 10 and 30-hour online OSHA training courses offered on our website are authorized by OSHA, and are accepted in Ennis TX as well as in all other states and US territories.

Special Safety Training Considerations for Workers in Ennis TX

While our onsite and online OSHA 10 and 30-hour training courses for construction and general industry are the gold standard for training about general hazard recognition and avoidance for workers and supervisors, there are many workers in Ennis who face unique environmental and occupational hazards that require other specialized safety training to prevent serious injuries and illnesses.  

For example, Heat Illness Prevention Training is considered essential for anyone working in high temperatures or humid conditions, where prolonged exposure can lead to heat stress and even life-threatening heat stroke. So, whether working on construction sites, roadwork, landscaping and lawn care crews, in commercial kitchens, attics, or buildings without adequate ventilation, affected workers must know how to recognize the early signs of heat-related illness and know how to stay hydrated, take proper rest breaks, and respond to emergencies. This training equips them with the knowledge needed to help them work safely in extreme heat.

At the other end of the spectrum, Cold Stress Prevention Training is critical for workers who are exposed to freezing temperatures or even cool and damp conditions, whether outdoors or in workplaces such as refrigerated warehouses, food processing plants, or unheated job sites. Cold stress can lead to frostbite, hypothermia, and reduced dexterity, increasing the risk of accidents. Workers will learn to recognize early symptoms of cold-related illnesses and implement safe work practices to minimize risk in frigid environments.

Also, workers in industries such as oil and gas, storm or wastewater management, mining, and agriculture must be aware of the dangers of Hydrogen Sulfide (H2S), a highly toxic gas commonly found in drilling sites, refineries, chemical plants, manure pits, grain elevators, mines, sewers, and underground utility spaces. Without proper precautions, exposure can quickly become fatal. H2S Hazard Awareness Training helps ensure workers can identify H2S hazards, understand the importance of gas detection equipment, and follow emergency procedures to stay safe in high-risk environments.

Workers must complete Confined Space Entry Training for General Industry before entering hazardous areas such as tanks, vats, silos, sewer and storm drain systems, underground utilities, and many crawl spaces. Supervisors overseeing confined space entry and attendants monitoring entrant safety must also be trained. These environments pose serious risks, including toxic gases, oxygen deficiency, and engulfment. Additionally, construction workers and supervisors entering confined spaces must complete specialized Confined Space Training for Construction.